|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MITSUBISHI IGBT MODULES CM600HU-12F HIGH POWER SWITCHING USE CM600HU-12F IC ................................................................... 600A VCES ............................................................ 600V Insulated Type 1-elements in a pack APPLICATION General purpose inverters & Servo controls, etc OUTLINE DRAWING & CIRCUIT DIAGRAM Dimensions in mm 107 930.25 13.5 26 29 20.5 4-6.5 MOUNTING HOLES 8.5 12.55 10 9.5 19.1 62 480.25 17.2 6.5 G E 6.5 8.5 E 21.15 C CM 2-M4NUTS 18 Tc measured point 2-M8NUTS 4 24.35 E +1 26 -0.5 C RTC LABEL 34+1 -0.5 E G CIRCUIT DIAGRAM Aug. 1999 MITSUBISHI IGBT MODULES CM600HU-12F HIGH POWER SWITCHING USE MAXIMUM RATINGS (Tj = 25C) Symbol VCES VGES IC ICM IE (Note 1) IEM (Note 1) PC (Note 3) Tj Tstg Viso -- -- Parameter Collector-emitter voltage Gate-emitter voltage Collector current Emitter current Maximum collector dissipation Junction temperature Storage temperature Isolation voltage Torque strength Weight G-E Short C-E Short TC = 25C Pulse TC = 25C Pulse TC = 25C Conditions Ratings 600 20 600 1200 600 1200 1420 -40 ~ +150 -40 ~ +125 2500 8.8 ~ 10.8 3.5 ~ 4.5 1.3 ~ 1.7 450 Unit V V A A W C C V N*m N*m N*m g (Note 2) (Note 2) Main terminal to base plate, AC 1 min. Main Terminal M8 Mounting holes M6 G(E) Terminal M4 Typical value ELECTRICAL CHARACTERISTICS (Tj = 25C) Symbol ICES VGE(th) IGES VCE(sat) Cies Coes Cres QG td(on) tr td(off) tf trr (Note 1) Qrr (Note 1) VEC(Note 1) Rth(j-c)Q Rth(j-c)R Rth(c-f) Rth(j-c')Q RG Parameter Collector cutoff current Gate-emitter threshold voltage Gate leakage current Collector-emitter saturation voltage Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Turn-on delay time Turn-on rise time Turn-off delay time Turn-off fall time Reverse recovery time Reverse recovery charge Emitter-collector voltage Thermal resistance*1 Test conditions VCE = VCES, VGE = 0V IC = 60mA, VCE = 10V VGE = VCES, VCE = 0V Tj = 25C IC = 600A, VGE = 15V Tj = 125C VCE = 10V VGE = 0V VCC = 300V, IC = 600A, VGE = 15V VCC = 300V, IC = 600A VGE1 = VGE2 = 15V RG = 3.1, Inductive load switching operation IE = 600A IE = 600A, VGE = 0V IGBT part FWDi part Case to fin, Thermal compoundapplied*2 Tc measured point is just under the chips Min. -- 5 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 3.1 Limits Typ. -- 6 -- 1.6 1.6 -- -- -- 3720 -- -- -- -- -- 11.7 -- -- -- 0.02 -- -- Max. 1 7 80 2.2 -- 160 11 6.0 -- 600 400 900 250 300 -- 2.6 0.088 0.12 -- 0.048V3 31 Unit mA V A V nF nC ns ns C V C/W Contact thermal resistance Thermal resistance External gate resistance Note 1. IE, VEC, trr, Qrr, die/dt represent characteristics of the anti-parallel, emitter to collector free-wheel diode. (FWDi). 2. Pulse width and repetition rate should be such that the device junction temp. (Tj) does not exceed Tjmax rating. 3. Junction temperature (Tj) should not increase beyond 150C. 4. Pulse width and repetition rate should be such as to cause negligible temperature rise. *1 : Tc measured point is indicated in OUTLINE DRAWING. *2 : Typical value is measured by using Shin-etsu Silicone "G-746". *3 : If you use this value, Rth(f-a) should be measured just under the chips. Aug. 1999 MITSUBISHI IGBT MODULES CM600HU-12F HIGH POWER SWITCHING USE PERFORMANCE CURVES OUTPUT CHARACTERISTICS (TYPICAL) COLLECTOR CURRENT IC (A) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) (V) 1200 Tj=25C 1000 800 600 VGE=20V 9.5 15 11 10 3 VGE = 15V 2.5 2 1.5 1 0.5 0 Tj = 25C Tj = 125C 0 400 800 1200 9 8.5 400 200 0 8 7.5 0 0.5 1 1.5 2 2.5 3 3.5 4 COLLECTOR-EMITTER VOLTAGE VCE (V) COLLECTOR CURRENT IC (A) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) (V) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) 103 7 5 5 Tj = 25C EMITTER CURRENT IE (A) Tj = 25C 4 3 2 102 7 5 3 2 3 IC = 1200A IC = 600A IC = 240A 2 101 7 5 3 2 1 0 6 8 10 12 14 16 18 20 100 0 0.5 1 1.5 2 2.5 3 3.5 4 GATE-EMITTER VOLTAGE VGE (V) EMITTER-COLLECTOR VOLTAGE VEC (V) CAPACITANCE-VCE CHARACTERISTICS (TYPICAL) 103 CAPACITANCE Cies, Coes, Cres (nF) 7 5 3 2 HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) 103 7 5 3 2 td(off) td(on) tf tr Cies 102 7 5 3 2 SWITCHING TIMES (ns) 102 7 5 3 2 101 7 5 3 2 101 7 5 3 2 VGE = 0V Cres Coes Conditions: VCC = 300V VGE = 15V RG = 3.1 Tj = 125C 100 -1 10 2 3 5 7 100 2 3 5 7 101 2 3 5 7 102 COLLECTOR-EMITTER VOLTAGE VCE (V) 100 0 10 2 3 5 7101 2 3 5 7102 2 3 5 7 103 COLLECTOR CURRENT IC (A) Aug. 1999 MITSUBISHI IGBT MODULES CM600HU-12F HIGH POWER SWITCHING USE REVERSE RECOVERY CHARACTERISTICS OF FREE-WHEEL DIODE (TYPICAL) REVERSE RECOVERY TIME trr (ns) REVERSE RECOVERY CURRENT lrr (A) NORMALIZED TRANSIENT THERMAL IMPEDANCE Zth (j-c) (C/W) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT part & FWDi part) 10-3 2 3 5 710-2 2 3 5 710-1 2 3 5 7 100 2 3 5 7 101 101 7 IGBT part: 5 Per unit base = Rth(j-c) = 0.088C/W 3 FWDi part: 2 Per unit base = Rth(j-c) = 0.12C/W 100 7 5 3 2 7 5 3 2 7 5 3 2 3 2 103 7 5 3 2 102 1 7 5 3 2 trr Irr 10-1 10-1 7 5 3 2 7 5 3 2 Conditions: VCC = 300V VGE = 15V RG = 3.1 Tj = 25C 2 3 5 7 103 10-2 Single Pulse TC = 25C 10-2 101 1 10 2 3 5 7 102 10-3 10-3 10-5 2 3 5 710-4 2 3 5 7 10-3 TMIE (s) EMITTER CURRENT IE (A) GATE CHARGE CHARACTERISTICS (TYPICAL) 20 GATE-EMITTER VOLTAGE VGE (V) 18 16 14 12 10 8 6 4 2 0 0 IC = 600A VCC = 200V VCC = 300V 1000 2000 3000 4000 5000 GATE CHARGE QG (nC) Aug. 1999 |
Price & Availability of CM600HU-12F |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |